Stenofon NPE type P
- Substrate for «Warm floor» systems in professional construction of residential, industrial and commercial buildings with increased operational loads.
Advantages
- Resistant to increased loads.
- Doesn’t crack after contact with cement screed.
- Service life of 50 years.
- Is used for thermal insulation of floors, walls, roofs.
Go to cart





Stenofon NPE — Expanded polyolefin
Polyolefin (PP) − in comparison with polyethylene is characterized by increased rigidity, especially in the upper part of the temperature range of use (short-term up to + 150 ° C). It is characterized by high chemical resistance and good stability even with high temperatures.
Foamed thermal insulation «Stenofon NPE» is an environmentally friendly product, has a high resistance to chemically aggressive external conditions, high temperature, corrosion, has a low coefficient of thermal conductivity. That is why the active use of this material is recommended for both indoors and outdoors, for constructing ventilation and heating systems.
Stenofon NPE is a perfect solution for making insulation of “warm floor” systems in multi-storey buildings. It’s low thickness allows to reduce general width of the construction and to save free space in living rooms and ready-made markings for the convenience of laying heating elements can significantly reduce installation time.
Thickness | Length of rolls | |
---|---|---|
2mm | 100 meters | |
3mm | 100 meters | |
4mm | 100 meters | |
5mm | 50 meters | |
8mm | 50 meters | |
10mm | 50 meters |
Density, kg / m3 | 35-40 |
---|---|
Thermal conductivity coefficient at 25 ° С, W / m-K | 0.32-0.034 |
Relative compression at a load of 2000 N / m2,% | 0.044 |
Coefficient of warm reflection of the surface,% | 80 |
Operating temperature range, ° С | -40 to +150 |
Fire safety class compliance groups | G4, B2, D3, T2 |
Colour | Gray |
Release form | Rolls |
Insulation of balconiesStenofon NPE type P is perfectly suitable for creating a “Warm floor” system on your balcony. More info in this article. |
![]() |